#1 Remover maximum performance stripper
DESCRITION #1 Remover breaks down all floor finishes and non-permanent sealers completely with less dwell time, reducing your costs. #1 Remover does not contain any NPEs (nonyl phenol ethoxylates), APEs (alkyl phenol ethoxylates),butyl-based solvents orphosphates and the lower VOCs (volatile organiccompounds) result in lower odour and a safer environment. The time required toliquefy and lift floor finishes and sealers has been reduced from the old 10 to 15minutes of other strippers to only 5 minutes for the newly formulated #1Remover. THIS SAVES YOU TIME AND MONEY.
#1 Remover is for use on all types of flooring such as resilient tile, terrazzo,marble, stone, vinyl and vinyl composites. NOTE: Manufacturers of linoleum flooring do not recommend strippers be used on their floors unless they have allow pH like M-chem Burlesque, which was developed specifically for linoleum.
Procedures:Dust mop entire surface to be stripped.Dilute #1 Remover with cold or warm water (refer to the dilution ratio below). Apply this dilution to an area approximately 10 ft x 10 ft and allow 5 minutes for #1 Remover to liquefy finish. Do not permit stripper to dry on floor. Scrub thoroughly with a floor machine and blue or black pad. If you do not have a machine, agitate with a mop or doodle bug holder and pad –longer dwell times may be required. Pick up the solution with a wet-vac, auto-scrubber or mop and rinse the floor with a dilution of Neutra Max at 1 oz per US gallon of cold water(8ml/litre)(1:128).
Heavy finish build-up: Use 26 oz per US gallon of water (200 ml/litre) (1:5). Light finish build-up:Use 13 oz per US gallon of water (100 ml/litre) (1:10